To receive future notifications of when stock is available please create an account and subscribe to our newsletter, or follow us on facebook and Twitter as we often post updates there. We don't sell your personal information unlike most Evil Corporations and we only send you newsletters if you have opted in.
The RAD2x is the perfect plug and play low latency solution for connecting your RGB modified PC Engine, PC Engine Duo and TurboGrafx to a modern flat screen television which only has HDMI inputs. This is based on the same technology used in the RetroTINK2x with the added bonus of supporting RGB video, and unlike other all-in-one HD cable solutions the RAD2X correctly interprets the the 240p signal correctly and processes this as a progressive scan image and then line doubles this to 480p.
- Formats: 240p/480i, 288i/576i, NTSC and PAL
- Input: RGB internally converted to YPbPr
- Built-in anti-aliasing LPF
- Output: miniHDMI at 480p/576p (line-doubled mode)
- Default 4:3 Aspect Ratio
- Latency: About 53 microseconds
- Audio: 24-bit stereo
- Optional smoothing filter with mechanical ON/OFF switch
- No need for external power supply
- Fully shielded PACKAPUNCH cable from the console to the RAD2X
Requires a Male HDMI to mini C HDMI cable (not supplied). However we sell a 1 metre cable here.
This cable uses a large 8 pin DIN connector (270 degree) and is wired using the following pin assignment. Wired to the following Specs:
8 Pin DIN plug (looking into back of connector)
3 8 1
Pin 8 = GREEN
Pin 7 = RED
PIN 6 = BLUE
PIN 5 = Audio Right
PIN 4 = +5V
PIN 3 = SYNC
PIN 2 = GND
PIN 1 = Audio Left
If you require a different pin assignment please advise when placing the order. If you are unsure about the pin assignment please consult the modifier of the console.
All cables are tested before dispatch. Made in Great Britain. This is not an official NEC Product. Produced under Licence by RetroTink LLC.
Powered by RetroTINK