Level up with an RGB SCART! This cable supplies an RGB video signal and stereo sound from your NTSC Super Nintendo, Super Famicom or N64 (RGB modified only) which is far superior than the original video cable, plus with an RGB SCART there is no need for TV tuning, simply plug and play. This cable is screened to minimise interference , the SCART plug audio ground is connected to reduce the buzzing noise often experienced with some cables, and both ground pins 5 and 6 on the Multi AV connector are connected via separate wires to the SCART plug to also help reduce noise. It also benefits from internal capacitors connected in series with each RGB video line to remove any direct current (DC) signals, which may impede the true alternating current signal used in signal transmissions. This cable is wired for CSYNC also know as "composite sync" which takes the sync signal from pin 3 of the Multi-AV out, and the resulting picture is far superior than the regular "sync over composite video" (Multi-AV pin 9), which can suffer from sync issues. Therefore this special CSYNC cable gives the best solid image. Finally the SCART plug can be wired as either EuroSCART or JP21, the choice is yours! The JP21 option is subject to availability.
If your SNES is a 1-CHIP-03 model which doesn't support CSYNC then please select the "Luma Sync for 1CHIP-03 model" from the sync option.
- No Tuning required, just plug and play.
- True RGB video & stereo sound.
- Constructed from custom screened cable especially made for Retro Gaming Cables.
- Available with two output connector types, either a EuroSCART / Péritel plug for use with SCART televisions, SCART to HDMI converters and SCART to component video converters, or a JP21 pin plug also known as RGB-J or Japanese 21 pin for direct connection to the XRGB-1, XRGB-2 & XRGB-3 up-scalers. Please select from options. For more info on the SCART format see our EuroSCART vs JP21 article.
- Wired for CSYNC to give the best RGB picture from your NTSC SNES. Also available as "sync over luma" for 1-chip models which don't support CSYNC. For further information on sync types please our Demystifying RGB Sync guide.
- Fully wired/ grounded SCART plug using a custom Printed Circuit Board.
- Quality Panasonic Capacitors
- Custom ID label on SCART plug.
The SCART Printed Circuit Board Design is Copyright © of Retro Gaming Gables.
- SCART enabled televisions (Please select EuroSCART / Péritel).
- SCART to HDMI converters (Please select EuroSCART / Péritel).
- SCART to component video converters (Please select EuroSCART / Péritel).
- Direct connection to XRGB-1, XRGB-2 & XRGB-3 (Please select JP21 / RGB-J).
- XRGB-mini Framemeister (Please select JP21 / RGB-J only for use with original Japanese 21 pin to mini adapter cable supplied with the Framemeister unit, or select EuroSCART / Péritel if you have a EuroSCART to mini adapter cable). The JP21 option is subject to availability.
Please note that this NTSC SNES cable will only work with original SNES and Super Famicom consoles released in North America and Asia. If you have a United Kingdom , European or Australian console (PAL version) then you will need an PAL Super Nintendo Entertainment System RGB SCART cable, which is also available from our store. All cables are tested before dispatch. Made in Great Britain. This is not an official Nintendo Product. The SCART Printed Circuit Board Design is Copyright © of Retro Gaming Gables.
If your Nintendo console has the 12 pin MULTI OUT or AV OUT port then please read this article because even though the ports look the same on each console you may need different cables for each system.
|Console||NTSC Super Nintendo Entertainment System and Super Famicom only|
|Country||Asia and North America.|
|Video and audio format|
|Sync type||Available as either CSYNC (composite sync) or "sync over luma" for the 1-CHIP-03 models. Please select required version from the options.|
|Connector A||Nintendo AV Multi Port.|
|Connector B||EuroSCART / Péritel or JP21/RGB-J (select required version from the options).|