RGB EuroSCART / European SCART to 8pin Mini DIN adapter for the Micomsoft Framemeister XRGB-mini. This is a direct replacement cable for the original Japanese 21 pin adapter supplied with the Framemeister unit. This replacement adapter allows the connection of games consoles and computers via RGB EuroSCART cable to the XRGB-mini Framemeister up-scaler unit, such as the Sega Mega Drive/Genesis, Super Nintendo, SNK Neo Geo etc. EuroSCART cables are more readily available than the Japanese 21 pin cables, so this adapter will increase the number of consoles you can connect to your Framemeister. This adapter is available as either a passive adapter or with a built in video sync separator.
Various coloured English overlays available for the XRGB-mini remote control
Generally for Framemeisters with Firmware 1.08 and above you can use this passive adapter. For older firmware you may experience sync problems when using a "sync over composite video" cable, therefore for older firmware we recommend the EuroSCART to mini adapter with built in video sync separator to achieve composite sync (CSYNC). A composite sync (CSYNC) signal eradicates timing problems often experienced with the XRGB mini up-scaler when connected to particular gaming machines, so even with the latest firmware you may still need a video sync separator if your SCART cable can only supply sync over composite video.
The overall cable is screened with metal foil shielding to minimise interference. All cables are tested before dispatch. Made in Great Britain. This is not an official Micomsoft product.
|Video and audio format|
|Sync type||This passive adapter will transmit any sync signal supplied by a EuroSCART cable, including "sync over composite video", "composite sync (CSYNC)" and "sync over luma". If you want to achieve composite sync (CSYNC) from a "sync over composite video" or "sync over luma" RGB EuroSCART then you will need the EuroSCART to mini adapter with built in video sync separator.|
|Connector A||Female EuroSCART|
|Connector B||8 pin mini DIN|